CHEAP VAN INSURANCE
Compare Van Insurance Quotes
Enter vehicle registration number
Don’t know the registration number?
Search and compare cheap quotes from over 110 UK insurance providers, including
Is Your Car Roadworthy? How To Ensure It Is
COVID-19, without a doubt, has definitely had an impact on the UK’s automotive industry. With the UK government stretching the MOT checks for cars due from March 30th to July 31st of 2020 by six months, there seem to be plenty of cars on the streets that obviously shouldn’t be there.
You can access garages once again. But if your car’s in a mess and you can’t repair it on your own, you should get booked in immediately. It’s never been more necessary to make sure your car is roadworthy with MOTs ready to check on you.
There are plenty of simple reasons why your car cannot obtain an MOT. However, there are certain measures you should do to make absolutely sure your car is safe and roadworthy. There are some things that you can do to ensure your ride is roadworthy; otherwise, you will need the help of a professional to resolve your automobile issues. Look at our top suggestions:
Test the lights
The rear, the fog lights, the headlights, the brake lights, and hazards are part of the critical lights of your vehicle. It’s easy to verify if they’re in good condition since they’re all visible.
A blown bulb is not difficult to repair. Checking your car manual will give you all the details you need to see how you can replace it yourself.
Don’t neglect your dashboard. You’ll need to turn the ignition on and you’ll immediately see if there are any problems with the dash lights.
Your car’s manual or handbook offers solutions to all of the questions about your vehicle. Tyres should have the correct pressure to drive legally. As such, always consult the manual. It’s going to tell you the specific pressure they should have.
Always check the tyres’ tread – 1.6 mm is the legal limit.
Body of the car
Next, make sure the horn is functioning. It’s the first step to completing your MOT check.
Check the brakes before you turn on the ignition. If they sound spongy or yield way quickly, the brake pads will have to be replaced.
When driving, apply the brakes strongly to a halt if it’s okay to do so. If you feel a noticeable pull in one direction, you might have the alignment of your car inspected.
If in some way, the steering wheel appears loose, the bearing might be loose or fractured.
A simple test can help check your handbrake.
- Press the foot pedal firmly
- Release the handbrake
- Reapply the handbrake
If the handbrake can be lifted so high, it’s no doing its job anymore. Your car should be safe and the handbrake shouldn’t put it at risk of rolling or moving while stationary.
Check for damage around your fuel inlet’s seal, where the petrol hose is placed. If the damage is too severe, it would have to be fixed.
Mirrors and Window Wipers
Your view needs to be perfect and unobstructed while driving. Look for any tears or cracks on your windshield wipers. If they need to be fixed, consult your owner’s manual for instructions to perform it DIY.
All mirrors in your vehicle should be intact and complete.
Scratches, dents, and cracks on the windscreen can be deemed a danger. You should be able to see where you’re headed without obstruction. You need to be capable of driving safely all the time.
In the perception of an MOT checker, a deteriorating seat belt will not be okay. Check the belts carefully and make sure they’re in tip-top condition. They also need to press and eject without too much force.
Always make sure that your seatbelts are always safe and secure – they just might save your life one day.
The car’s emissions may be harder to check especially if you have no experience checking them. It’s critical to inspect the emission system for your vehicle to be considered roadworthy.
Your vehicle may be consuming oil if you see any blue smoke. You may need to check the piston rings, valve caps, and turbochargers. A leak in the engine coolant, on the other hand, can cause white smoke from the exhaust or engine. Never let it stay unchecked!
Inspect your car carefully for rust corrosion, dents, sharp edges, teeth, and paint damage. Something that seems trivial at first might result in a failed MOT.
Visible Plate Number
Keeping your automobile tidy would make sure you’re not obstructing the number plate with mud or dirt. It’s important to follow the specifications of the DVLA and keep the number plate in good shape.
Clean Your Vehicle
Showing up with a clean vehicle helps guarantee a successful MOT inspection. Ensure the insides and exteriors of your car is clean since your MOT checker can reject your vehicle upon initial inspection.
You don’t need to stress yourself out to make your vehicle roadworthy. Follow these pointers to ensure your MOT goes smoothly. There are plenty of checks that you’ll be able to perform on your own so that you can get your car roadworthy as soon as possible.